How to Unpack and Set Up the HP DeskJet 2600 All-in-One Printer Series | HP DeskJet | HP

Learn how to unpack and set up the HP DeskJet 2600 All-in-One Printer Series. For more information on first time printer setup, visit our support site: https://support.hp.com/us-en/document/c05365349. For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport. More support options for your printer are available at http://hp.com/support. Continue the Conversation: http://hp.care/SupportForums http://hp.care/FacebookSupport http://hp.care/TwitterSupport Follow these steps to unpack and set up the HP DeskJet 2600 All-in-One Printer Series: - Open the box and remove the setup poster, user guide, and other reference materials. - The HP Instant Ink card is included with the reference materials. - Remove the printer power cord and USB cable, if one was provided with your printer. - Set them aside to connect later. - Remove the Black and Tri-color setup ink cartridges. - These cartridges are designed to initialize the printer and must be used during the hardware setup. - Remove the printer from the box. - Remove all plastic and blue tape from around the printer. - Open the output tray and then the ink cartridge access door. - Inside the ink cartridge access area, remove all tape and packing materials. - Close the ink cartridge access door and then the output tray. - From the unboxed materials, grab the power cord and connect it to the printer, and the other end into a wall outlet. - Press the Power button to turn on the printer. - Lower the output tray, and then the ink cartridge access door. - Remove the Black setup cartridge from its package. - Pull the tab to remove the plastic tape from the cartridge. - Do not touch the copper-colored contacts or ink nozzles. - Touching these can result in clogs, ink failure, and bad electrical connections. - Make sure you install the replacement cartridge in its correct slot. - Tri-color on the left, and Black on the right. - Hold the cartridge by its sides and slide it into its slot until it snaps into place. - Repeat these steps to install the Tri-color setup cartridge. - Close the ink cartridge access door. - The printer recognizes the setup cartridges and prepares the printer with the new ink. - Lift the input tray to raise it to its locked position. - Slide the paper width guide to its outermost position. - Flex a stack of plain white paper, and load it into the input tray. - Slide in the paper width guide until it rests on the edge of the paper without bending it. - Open the tray extender. - After you install the printer on your computer or device and print five print jobs, an alignment page prints. - Lift the scanner lid. - Remove the alignment page from the output tray and place it face-down on the scanner glass, following the markings as a guide. - Close the scanner lid, and then press the Start Copy Color button to scan the alignment page. - The alignment process is complete when the printer is idle and silent, and the ready light is lit. - With the hardware setup complete, it’s time to install the software. - On your computer or mobile device, go to 123.hp.com and follow the prompts to get the software for your operating system. - For video assistance with connecting and installing the software, find: How To Set Up a Wireless HP Printer from Android, How To Set Up a Wireless HP Printer from an iPad or iPhone, How to Install a Wireless HP Printer in macOS, and How To Install a Wireless HP Printer in Windows Using HP Easy Start. #HP #HPSupport #HPDeskJet SUBSCRIBE: http://bit.ly/PrinterSupport SHOP NOW: http://store.hp.com/us/en/ About HP: HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze. Connect with HP: Visit HP WEBSITE: http://www.hp.com Like HP on FACEBOOK: https://www.facebook.com/HP Follow HP on TWITTER: https://twitter.com/HP Follow HP on INSTAGRAM: https://www.instagram.com/hp Follow HP on LINKEDIN: https://www.linkedin.com/company/hp This video was produced by HP. How to Unpack and Set Up the HP DeskJet 2600 All-in-One Printer Series | HP DeskJet | HP https://www.youtube.com/user/HP
0 0 0
Submit comment
    No comments yet
✪ How to make MONEY PRINTER Machine ✪ StarTech Tips ✪
Admin
13 December 2018
FORTNITE FAILS & Epic Wins! #35 (Fortnite Battle Royale Funny Moments)
Admin
12 December 2018
How to Make an Origami Boomerang - Rob's World
Admin
13 December 2018
How to Make a Paper Crane (Origami) - Rob's World
Admin
13 December 2018
Super Mario Bros. Full Game Walkthrough
Admin
13 December 2018
How To Make a Paper Ninja Star (Shuriken) - Origami
Admin
13 December 2018
How To Set Up a New PC!
Admin
14 December 2018
Stranger Things | Trailer 1 [HD] | Netflix
Admin
13 December 2018
Submit media
Enter your nickname

Show

Show

Enter your email address and we will send you an email explaining how to change your password or activate your account.

Back to login form

Close